Customs and Excise Act, 1964 (Act No. 91 of 1964) > Schedules > Schedule IV : Rebates and Refunds of Customs Duties, Excise Duties, Fuel Levy, Road Accident Fund Levy, Environmental Levy and Health Promotion Levy > Part 2 : Temporary Rebates of Customs Duties

Rebate Item

Tariff Heading

Rebate Code

Description

Extent of Rebate

460.01

FISH, DAIRY PRODUCTS AND NATURAL HONEY, IMPORTED BY SPECIFIC PERMIT

460.01

03.02

01.04

Mackerel, horse-mackerel, snoek, kingklip, sole, angel fish (Brama raii), black marlin (Makaira indica), bigscale mackerel (gastoro) (Gasterochisma melampis), dorado (mai-mai) (Coryphaena hippurus), moon fish (opa) (Lampris reqius), oil fish, smooth (escolar) (Lepidocybium flavobrunneum), oil fish, rough (Ruvettus pretiousus), sawara (Acathocybium solandri), sail fish (Istiophorus platipterus), striped marlin (Tetrapturus audax), shortbill spear fish (sikiyami) (Tetrapturus angustirostris), sword fish (Xiphias gladius), ribbon fish (Lepidopus caudatus), monk (Lophius piscatorius), cavebass (Dinoperca petersi), Iyretail hogfish (Bodianus anthioides), turncoat hogfish (Bodianus axillaris), saddleback hogfish (Bodianus bilunulatus), diana's hogfish (Bodianus diana), lined hogfish (Bodianus leucostictus), goldsaddle hogfish (Bodianus perditio), yellowfin emperor (Lethrinus crocineus), river snapper (Lutjanus argentimaculatus), rosy lobfish (Pristipomoides filamentosus), king mackerel (Scomberomorus commerson), tomato rockcod (Cephalopholis sonnerati), white-edged rockcod (Epinephelus albomarginatus), brown-spotted rockcod (Epinephelus chlorostigma), malabar rockcod (Epinephelus malabaricus), halfmoon rockcod (Epinephelus rivulatus), englishman (Chrysoblephus anglicus), slinger (Chrysoblephus puniceus) and blueskin (Polysteganus coeruleopunctatus), in such quantities and at such times as the Director-General: Environmental Affairs may allow by specific permit

Full duty

460.01

0302.1

01.05

Salmonidae (excluding livers and roes), fresh or chilled [excluding trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)], for further processing by means of smoking, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit

Full duty

460.01

03.03

01.04

Mackerel, horse-mackerel, snoek, kingklip, sole, angel fish (Brama raii), black marlin (Makaira indica), bigscale mackerel (gastoro) (Gasterochisma melampis), dorado (mai-mai) (Coryphaena hippurus), moon fish (opa) (Lampris requis), oil fish, smooth (escolar) (Lepidocybium flavobrunneum), oil fish, rough (Ruvettus pretiousus), sawara (Acathocybium solandri), sail fish (Istiophorus platipterus), striped marlin (Tetrapturus audax), shortbill spear fish (sikiyami) (Tetrapturus angustirostris), sword fish (Xiphias gladius), ribbon fish (Lepidopus caudatus), monk (Lophius piscatorius), cavebass (Dinoperca petersi), Iyretail hogfish (Bodianus anthioides), turncoat hogfish (Bodianus axillans), saddleback hogfish (Bodianus bilunulatus), diana's hogfish (Bodianus diana), lined hogfish (Bodianus leucostictus), goldsaddle hogfish (Bodianus perditio), yellowfin emperor (Lethrinus crocineus), river snapper (Lutjanus argentimaculatus), rosy jobfish (Pristipomoides filamentosus), king mackerel (Scomberomorus commerson), tomato rockcod (Cephalopholis sonnerati), white-edged rockcod (Epinephelus albomarginatus), brown-spotted rockcod (Epinephelus chlorostigma), malabar rockcod (Epinephelus malabaricus), halfmoon rockcod (Epinephelus rivulatus), englishman (Chrysoblephus anglicus), slinger (Chrysoblephus puniceus) and blueskin (Polysteganus coeruleopunctatus), in such quantities and at such times as the Director-General: Environmental Affairs may allow by specific permit

Full duty

460.01

0303.1

01.05

Salmonidae (excluding livers and roes), frozen (excluding trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)), for further processing by means of smoking, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit

Full duty

460.01

03.04

01.04

Mackerel, horse-mackerel, snoek, kingklip, sole, angel fish (Brama raii), black marlin (Makaira indica), bigscale mackerel

(gastoro) (Gasterochisma melampis), dorado (mai-mai) (Coryphaena hippurus), moon fish (opa) (Lampris regius), oil fish, smooth (escolar) (Lepidocybium flavobrunneum), oil fish, rough (Ruvettus pretiousus), sawara (Acathocybium solandri), sail fish (Istiophorus platipterus), striped marlin (Tetrapturus audax), shortbill spear fish (sikiyami) (Tetrapturus angustirostris), sword fish (Xiphias gladius), ribbon fish (Lepidopus caudatus), monk (Lophius piscatorius), cavebass (Dinoperca petersi), lyretail hogfish (Bodianus anthioides), turncoat hogfish (Bodianus axillaris), saddleback hogfish (Bodianus bilunulatus), diana's hogfish (Bodianus diana), lined hogfish (Bodianus Leucostictus), goldsaddle hogfish (Bodianus perditio), yellowfin emperor (Lethrinus crocineus), river snapper (Lutjanus argentimaculatus), rosy jobfish (Pristipomoides filamentosus), king mackerel (Scomberomorus commerson), tomato rockcod (Cephalopholis sonnerati), white-edged rockcod (Epinephelus albomarginatus), brown-spotted rockcod (Epinephelus chlorostigma), malabar rockcod (Epinephelus malabaricus), rockcod (Epinephelus rivulatus), englishman (Chrysoblephus anglicus), slinger (Chrysoblephus puniceus) and blueskin (Polysteganus coeruleopunctatus), in such quantities and at such times as the Director-General: Department of Agriculture, Land Reform and Rural Development may allow by specific permit

Full duty

460.01

03.05

01.04

Dried fish, in such quantities and at such times as the International Trade Administration Commission may allow by specific

permit

Full duty

460.01

04.00

01.02

Dairy produce of headings 04.01, 04.02, 04.03, 04.04, 04.05 and 04.06 in such quantities and at such times as the Director-General: Department of Agriculture, Land Reform and Rural Development may allow by specific permit: Provided that such permit shall be issued under such conditions as may be agreed upon by the Governments of the Republic, Botswana, Eswatini, Lesotho and Namibia: Provided further that goods cleared in terms of this rebate item shall not be removed to the area of Botswana, Eswatini, Lesotho, or Namibia

Full duty

460.01

04.09

01.04

Natural honey, in immediate packings of a content exceeding 1 kg, subject to such conditions as the Director-General: Department of Agriculture, Land Reform and Rural Development may allow by specific permit, for repacking into immediate packings of a content of less than 1 kg

Full duty

460.02

POTATOES, LEGUMINOUS VEGETABLES, CEREALS, OIL SEEDS AND SWEET CORN, IMPORTED BY SPECIFIC PERMIT

460.02

00.00

01.00

Potatoes, dried leguminous vegetables, cereals, oil seeds and sweet corn, verified by the Director-General: Department of Agriculture, Land Reform and Rural Development that it can only be used for planting or sowing

Full duty

460.02

0904.2

01.05

Dried, crushed or ground fruits of the genus Capsicum for the extraction of oleoresin of a kind used in the food industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the Commission is satisfied that the subject fruits are not available in the SACU region

Full duty

460.02

1001.9

01.05

Wheat (excluding durum wheat), in such quantities and at such times as the Director-General: Department of Agriculture, Land Reform and Rural Development may allow by specific permit: Provided that such permit shall be issued under such conditions as may be agreed upon by the Governments of the Republic of Botswana, Eswatini, Lesotho and Namibia: Provided further that wheat and wheaten flour obtained from such wheat cleared in terms of this rebate item, shall not be removed to the area of Botswana, Eswatini, Lesotho or Namibia

Full duty

460.02

12.05

01.04

Rape seed, whether or not broken, in such quantities and at such times as the Director-General: Department of Agriculture, Land Reform and Rural Development may allow by specific permit

Full duty

460.03

MEAT AND EDIBLE MEAT OFFAL

460.03

0207.14.9

01.07

Frozen meat of the species Gallus domesticus, cut in pieces with bone in and imported from or originating in the United States of America, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission (ITAC) may allow by specific permit on recommendation of the Director General: Department of Agriculture, Forestry and Fisheries (DAFF), provided that—

(a)	With effect from 1 April 2016, permits may be issued by ITAC for meat imported in terms of this rebate item;

(b)	From the date this rebate item comes into operation up to and including 31 March 2016 meat imported in terms of this rebate item shall be on a first-come-first-serve basis;

(c)	The meat subject to the provisions of this rebate item may not exceed a basic annual quota of 68 590 metric tonnes;

(d)	The annual quota period is 1 April to 31 March;

(e)	Prior to 1 April 2016, the quota shall be 16250 metric tonnes;

(f)	As from 1 April 2017 a growth factor as determined by DAFF is applied to the basic quota annually;

(g)	The meat imported in terms of this rebate item may not be removed outside the Republic for consumption in any of the BLNS countries;

(h)	The permit is not transferable and may not be used to obtain meat to the benefit of any entity or person not named in the permit issued by ITAC;

(i)	This rebate item shall be suspended if any benefits that South Africa enjoyed under AGOA as at 1 November 2015 are suspended, and shall remain suspended for as long as those benefits under AGOA remains suspended; and

(j)	This rebate item is suspended in terms of paragraph (i) as from the date the Minister of Trade and Industry submits written confirmation to the Minister of Finance that South Africa's benefits under AGOA have been suspended.

[Schedule IV(Part 2)(460.03) substituted by Notice No. R1103, GG42658, dated 23 August 2019]

Full anti-dumping duty

460.04

FISH PREPARATIONS, SUGAR IN TERMS OF THE SADC TRADE PROTOCOL, GLUTEN FREE PREPARATIONS AND PREPARATIONS BASED ON FRUIT, IMPORTED BY SPECIFIC PERMIT

460.04

16.04

01.04

Preparations based on minced, flavoured and cooked fish, frozen, formed into products of an individual mass not exceeding 200 g, in such quantities and at such times as the Director-General: Agriculture, Forestry and Fisheries may allow by specific permit

Full duty

460.04

17.01

01.04

Raw or refined sugar or direct consumption crystal sugar falling within heading 17.01 which is produced in and imported from a Non-SACU SADC Member State subject to compliance with the Notes hereto—

Notes:

In these Notes, unless the context otherwise indicates - "Addendum to Annex VII" means the agreement by the TCS on Customs procedures entitled "Customs and Excise Rules for the Implementation of Market Access in terms of Annex VII of the SADC Trade Protocol" inserted as part of Annex VII in terms of the provisions of Notes 1(b)(ii) and 3(b) of Part B of the Schedule to the General Notes to Schedule No. 1; "Annex I" means Annex I and its Appendixes inserted in Part B of the Schedule to the General Notes to Schedule No. 1; "Annex VII" means Annex VII, Concerning Trade in Sugar in the Southern African Development Community, inserted after Annex I and its Appendixes in Part B of the Schedule to the General Notes to Schedule No. 1 as provided in Note 1(b) to that Part; "Non-SACU SADC Member States" means a net surplus sugar producing SADC Member State contemplated in the Addendum to Annex VII which is listed in paragraph 6 of Note K and which is not a member of SACU; "SACU Central Coordinating Authority" means the Commissioner for the South African Revenue Service; "SACU" means the Southern African Customs Union of which the members are the Republic of Botswana, the Kingdom of Eswatini, the Kingdom of Lesotho, and the Republic of Namibia; "SADC" means the Southern African Development Community; and "TCS" means Technical Committee on Sugar which means as defined in Annex VII "The body comprising representatives of Member States and sugar industries in all Member States".

2.	Entry under rebate of duty of sugar classified under heading 17.01 shall—

(a)	only apply to sugar for which quotas have been allocated to registered exporters by a non-SACU SADC Member State and certificates of origin have been issued in accordance with the provisions of the Addendum to Annex VII;

(b)

(i)

(aa)	a valid original certificate of origin which must be verified in respect of the registered exporter as prescribed in paragraph 4.3 of the Addendum and the rules;

(bb)	proof that the sugar has been consigned directly from the premises of a certified exporter to a consignee in the Republic as contemplated in Rule 2 of Annex I:

(ii)	compliance with—

(aa)	other provisions of the Addendum to Annex VII;

(bb)	any relevant provision of rule 49B.

3.	If sugar is imported for the purposes of entry in terms of the provisions of this item and the original certificate of origin is not produced at the time of entry to prove the originating status of the sugar, the consignment shall be dealt with as provided in section 49(9).

(a)

In cases of reasonable doubt regarding the details of a registered exporter appearing on an original certificate of origin as contemplated in the Addendum to Annex VII, the customs authority of an importing SACU Member State shall submit the documents for verification to the Commissioner as prescribed in the rules.

(b)	If any sugar for which the certificate of origin has been issued is not exported within 20 working days from the date of issue, the sugar shall, on importation into the Republic, be liable to duty at the general rate of duty specified in Part 1 of Schedule No. 1.

Full duty

460.04

19.00

01.02

Preparations of wheat or wheaten flour, gluten-free

Full duty

460.04

2008.20

01.06

Canned pineapples in containers holding 3 kg or more, in such quantities, at such times and under such conditions as the International Trade Administration Commission may allow by specific permit for further processing, provided that the Commission is satisfied that pineapples suitable for canning are not available in sufficient quantities in the SACU area.

Full duty

460.04

2009.89

10.06

Mango juice concentrate, with a Brix value exceeding 25, in such quantities, at such times and under such conditions as the International Trade Administration Commission may allow by specific permit

Full duty

460.05

MINERAL PRODUCTS

460.05

27.01

01.04

Specified aliphatic hydrocarbon solvents, as defined in Additional Note1(ii) to Chapter 27, entered for the purpose of this rebate item in such quantities, for such purposes and under such conditions as the Commissioner may allow by specific permit

Full duty

460.05

2713.20

01.06

Petroleum bitumen, in such quantities, at such times and under such conditions as the International Trade Administration Commission may allow by specific permit

Full duty

460.05

2712.10.20

01.08

Petroleum jelly, in immediate packing of a content exceeding 5 kg, for the manufacture of optical fibre cables, classifiable in tariff subheading 8544.70, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.07

3916.90.90

01.08

Other, monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of other plastics, for the manufacture of optical fibre cables, classifiable in tariff subheading 8544.70, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

72.17

01.04

Wire of non-alloy steel, clad with aluminium, for use in the further processing of optical fibre cable, classifiable in tariff subheading 8544.70, by reinforcing the optical fibre cable with one or more layer of stranded wire, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.16

8544.70

01.06

Optical fibre cable, for further processing by reinforcing the fibre optical cable with one or more layer of wire, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.18

9001.10

01.06

Optical fibres, not individually sheathed, for use in the manufacture of optical fibre cables, classifiable in tariff subheading 8544.70, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

[Schedule IV(Part 2)(460.05) substituted by Notice No. R1347, GG42773, dated 18 October 2019]

Full duty

460.06

CHEMICAL PRODUCTS

460.06

38.24

01.04

Mixtures containing dichlorodifluoromethane or trichlorofluoromethane or both, in such quantities and at such times as the International Trade Administration Commission may allow by specific permit

Full duty less the duty in

Section A of Part 2 of

Schedule No. 1

460.06

38.24

02.04

Mixtures containing chlorodifluoromethane or mono-chloropentafluoroethylene or both

Full duty less the duty in

Section A of Part 2 of

Schedule No. 1

460.07

PLASTICS AND RUBBER ARTICLES

460.07

3916.90.90

01.08

Full duty

460.07

39.17

02.04

Tubes, pipes and hoses, of plastics, which at a temperature of 120°C have a shrinkage coefficient of 15 per cent or more, or

prestretched, specially designed for the protection, insulation and strain relief of wire, cable, cable joints and the like from

abrasion, corrosion and moisture

Full duty

460.07

3920.49

01.06

Plates, sheets, film, foil and strip of polymers of vinyl chloride (PVC), non-cellular and not re-inforced, laminated, supported or similarly combined with other materials and having a plasticizer content not exceeding 6%, originating in or imported from China, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, after the Commission is satisfied that such goods will be used exclusively for the manufacture of cards incorporating a magnetic stripe, cards incorporating semiconductor devices and SIMM or DIMM cards

The full anti-dumping duty

460.07

3920.49

02.06

Plates, sheets, film, foil and strip of polymers of vinyl chloride (PVC), non-cellular and not re-inforced, laminated, supported or similarly combined with other materials and having a plasticizer content not exceeding 6%, originating in or imported from Taiwan, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, after the Commission is satisfied that such goods will be used exclusively for the manufacture of cards incorporating a magnetic stripe, cards incorporating semiconductor devices and SIMM or DIMM cards

Full anti-dumping duty

460.07

40.02

01.04

Polybutadiene-styrene rubber, in such quantities and at such times as the International Trade Administration Commission may allow by specific permit

Full duty less 11 c/kg

460.07

4011.10

01.06

New pneumatic tyres, of rubber, of a kind used on motor cars for organised motor sport, under such conditions as the International Trade Administration Commission, after consultation with Motorsport South Africa, may allow by specific permit

Full duty

460.10

PAPER AND PAPERBOARD ARTICLES

460.10

48.02

01.04

Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and punch card stock and punch tape paper, in rolls or sheets, of a value for duty purpose not exceeding R265/t

Full duty

460.10

48.03

01.04

Cellulose wadding, for the packing of fresh fruit

Full duty

460.10

48.10

01.04

Graphitised paper

Full duty

460.10

48.11

01.04

Bottle tissue paper, lined

Full duty

460.10

48.11

02.04

Paper and paperboard, impregnated with oil, unprinted, of a mass less than 35 g/m²

Full duty less 7,5%

460.11

TEXTILES AND TEXTILES ARTICLES

460.11

00.00

01.00

Used overcoats, car-coats, raincoats, anoraks, ski-jackets, duffel-coats, mantles, three-quarter coats, greatcoats, hooded caps, trench coats, gabardines, padded waistcoats and parkas (excluding any other clothing articles) classifiable in tariff headings 61.01, 61.02, 62.01, 62.02 and 6309.00.13, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit.

Note:

Used overcoats that are admissible under this item must be imported in bales and must be designed to be worn over all other clothing articles as protection against the weather.

Full duty less 30%

460.11

52.01

01.04

Cotton, not carded or combed, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit.

Full duty

460.13

GLASS AND GLASSWARE

460.13

70.10

01.04

Glass bottles of a metric capacity, for the packing of mineral water, beer, wine and spirituous beverages, in such quantities and

at such times as the International Trade Administration Commission, may allow by specific permit

Full duty

460.14

IMITATION JEWELLERY

460.14

7117.19

01.06

Bracelets and pendants, of stainless steel, incorporating a plate engraved with medical insignia for engraving with medical particulars of an individual, in such quantities and at such times as the International Trade Administration Commission, may allow by specific permit

Full duty

460.15

ARTICLES OF IRON OR STEEL AND ALUMINIUM

460.15

7208.25

01.06

Flat-rolled products of iron or non-alloy steel, in coils, not further worked than hot rolled, pickled, of a thickness of 4,75 mm or more and a width exceeding 1 925 mm, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.25

02.06

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad, plated or coated, other, in coils, not further worked than hot-rolled, pickled, of a thickness of 4,75 mm or more, for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.26

01.06

Flat-rolled products of iron or non-alloy steel, in coils, not further worked than hot rolled, pickled, of a thickness of 3 mm or more, but less than 4,75 mm and a width exceeding 1 925 mm, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.36

01.06

Other flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of 10 mm or more but not exceeding 12 mm, with a yield strength of 355 MPa or more but not exceeding 500 MPa and having an impact strength of 14 Joules or more but not exceeding 300 Joules at -20°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.37

01.06

Other flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of 5 mm or more but not exceeding 10 mm, with a yield strength of 355 MPa or more but not exceeding 500 MPa and having an impact strength of 14 Joules or more but not exceeding 300 Joules at -20°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.39

01.06

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad, plated or coated, in coils, not further worked than hot-rolled, of a thickness of less than 3 mm, for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

01.05

Flat-rolled products of iron or non-alloy steel, of a width exceeding 600 mm or more but not exceeding 1 800 mm, not in coils, not further worked than hot-rolled and of a thickness of 3 mm or more but not exceeding 8 mm, (excluding those with a Brinell harness of 425 HBW or more) with a yield strength of 700 MPa or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full safeguard duty

460.15

7208.5

02.05

Flat-rolled products of iron or non-alloy steel, of a width exceeding 600 mm or more but not exceeding 1 800 mm, not in coils, not further worked than hot-rolled and of a thickness of less than 3 mm or more than 8 mm, (excluding those with a Brinell harness of 425 HBW or more) with a yield strength of 700 MPa or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full safeguard duty

460.15

7208.5

03.05

Flat-rolled products of iron or no-alloy steel, of a width exceeding 600 mm but not exceeding 1 800 mm, not in coils, not further worked than hot-rolled and of a thickness of 2 mm or more but not exceeding 10 mm with a Brinell harness of 425 HBW or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full safeguard duty

460.15

7208.5

04.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 160 mm, with a yield strength of 550 MPa or more but not exceeding 960 MPa and having an impact strength of 27 Joules or more but not exceeding 69 Joules at -20°C or less but not less than -60°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

05.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 160 mm, with a Brinell hardness of 400 HBW or more but not exceeding 700 HBW and having an impact strength of 15 Joules or more but not exceeding 95 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

06.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 40 mm or more but not exceeding 160 mm, with a Brinell hardness of 350 HBW and having an impact strength of 95 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

07.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 5 mm or more but not exceeding 50 mm, with a Brinell hardness of 350 HBW and having an impact strength of 60 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

08.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 6 mm or more but not exceeding 200 mm, with a yield strength of 600 MPa or more but not exceeding 1 200 MPa and having an impact strength of 27 Joules or more at -40°C or less but not less than -60°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

09.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 7 mm or more but not exceeding 30 mm, with a yield strength of 460 MPa and having an impact strength of 27 Joules or more at -40°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

10.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 6 mm or more but not exceeding 200 mm, with a tensile strength of 485 MPa and having an impact strength of 27 Joules or more at -20°C or less but not less than -40°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

11.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 6 mm or more but not exceeding 150 mm, with a Brinell hardness of 310 HBW or more but not exceeding 450 HBW and having an impact strength of 30 Joules at -40°C in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

12.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 6 mm or more but not exceeding 200 mm, with a Brinell hardness of 420 HBW or more but not exceeding 620 HBW and having an impact strength of 25 Joules or more at -40°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

13.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 160 mm, with a yield strength of 460 MPa or more but not exceeding 960 MPa and having an impact strength of 27 Joules or more but not exceeding 300 Joules at -20°C or less but not less than -60ºC, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

14.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 300 mm, with a yield strength of 200 MPa or more but not exceeding 500 MPa and having an impact strength of 27 Joules or more but not exceeding 350 Joules at -20°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

15.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness not exceeding 160 mm, with a yield strength of 295 MPa or more but not exceeding 500 MPa and having an impact strength of 27 Joules or more but not exceeding 260 Joules at -20°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not

available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

16.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 160 mm, with a Brinell hardness of 380 HBW or more but not exceeding 460 HBW and having an impact strength of 15 Joules or more but not exceeding 200 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.5

17.05

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 160 mm, with a Brinell hardness of 469 HBW or more but not exceeding 540 HBW and having an impact strength of 15 Joules or more but not exceeding 200 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.51

01.06

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 10 mm or more but not exceeding 100 mm, with a yield strength of 315 MPa or more but not exceeding 460 MPa and a tensile strength of 490 MPa or more but not exceeding 650 MPa, having an impact strength of 27 Joules or more but not exceeding 40 Joules at +20°C or less but not less than -20°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.51

02.06

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness exceeding 100 mm, in such quantities and such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7208.51

03.06

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness exceeding 60 mm but not exceeding 100 mm, in such quantities and such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the

SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7209.16

01.06

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad, plated or coated, in coils, not further worked than cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm, for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

7209.17

01.06

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad, plated or coated, in coils, not further worked than cold-rolled (cold-reduced), of a thickness of 0,5 mm or more but not exceeding 1 mm, for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

7210.49

01.06

Flat rolled products of iron or non-alloy steel, of a width of 600 mm or more, otherwise plated or coated with zinc, other, for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

7210.61

01.06

Flat rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated with aluminium-zinc alloys, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

7210.70

01.06

Flat rolled products of iron or non-alloy steel, of a width of 600 mm or more, painted, varnished or coated with plastics, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

7216.32

01.06

I sections of iron or non-alloy steel not further worked than hot-rolled, hot-drawn or extruded, of a height of 530 mm or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

7216.33

01.06

H sections of iron or non-alloy steel not further worked than hot-rolled, hot-drawn or extruded, of a height and width of 300 mm x 300 mm or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

72.17

01.04

Full duty

460.15

7225.30

01.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, other, not further worked than hot-rolled, in coils, for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

01.06

Flat-rolled products of other alloy steel, of a width exceeding 600 mm but not exceeding 1 800 mm, not in coils, not further worked than hot-rolled and of a thickness of 3 mm or more but not exceeding 8 mm, (excluding those with a Brinell harness of 425 HBW or more) with a yield strength of 700 MPa or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in

the SACU market

Full safeguard duty

460.15

7225.40

02.06

Flat-rolled products of other alloy steel, of a width exceeding 600 mm but not exceeding 1 800 mm, not in coils, not further worked than hot-rolled and of a thickness of less than 3 mm or more than 8 mm, (excluding those with a Brinell harness of 425 HBW or more) with a yield strength of 700 MPa or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the

SACU market

Full safeguard duty

460.15

7225.40

03.06

Flat rolled products of other alloy steel, of a width exceeding 600 mm but not exceeding 1 800 mm, not in coils, not further worked than hot-rolled and of a thickness of 2 mm or more but not exceeding 10 mm with a Brinell harness of 425 HBW or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full safeguard duty

460.15

7225.40

04.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness of 2 mm or more but not exceeding 160 mm, with a yield strength of 550 MPa or more but not exceeding 960 MPa and having an impact strength of 27 Joules or more but not exceeding 69 Joules at -20°C or less but not less than -60°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

05.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness of 2 mm or more but not exceeding 160 mm, with a Brinell hardness of 400 HBW or more but not exceeding 700 HBW and having an impact strength of 15 Joules or more but not exceeding 95 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

06.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness of 40 mm or more but not exceeding 160 mm, with a Brinell hardness of 350 HBW and having an impact strength of 95 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

07.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness of 5 mm or more but not exceeding 50 mm, with a Brinell hardness of 350 HBW and having an impact strength of 60 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

08.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness of 2 mm or more but not exceeding 100 mm, with a nickel content of 1.8 per cent by mass or more but not exceeding 3 per cent, a molybdenum content of 0.7 per cent by mass or more but not exceeding 0.8 per cent and a chrome content of 1 per cent by mass or more but not exceeding 2 per cent, with a Brinell hardness of 260 HBW or more but not exceeding 640 HBW, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

09.06

Flat-rolled products of other alloy, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, with a thickness of 2 mm or more but not exceeding 20 mm, with a copper content of 0.25 per cent by mass or more but not exceeding 0.4 per cent and a chromium content of 1 per cent by mass or more but not exceeding 2 per cent, with a yield strength of 550 MPa or more but not exceeding 960 MPs, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

10.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 6 mm or more but not exceeding 200 mm, with a yield strength of 670 MPa or more but not exceeding 1 200 MPa and having an impact strength of 27 Joules or more at -40°C or less but not less than -60°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

11.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 7 mm or more but not exceeding 30 mm, with a yield strength of 460 MPa and having an impact strength of 7 Joules at -40°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

12.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 6 mm or more but not exceeding 200 mm, with a yield strength of 460 MPa and having an impact strength of 27 Joules or more but not exceeding 45 Joules at -20°C but not less than -40°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

13.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 6 mm or more but not exceeding 150 mm, with a Brinell hardness of 310 HBW or more but not exceeding 450 HBW and having an impact strength of 30 Joules at -40°C in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

14.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 6 mm or more but not exceeding 200 mm, with a Brinell hardness of 420 HBW or more but not exceeding 620 HBW and having an impact strength of 25 Joules or more at -40°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

15.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 160 mm, with a yield strength of 460 MPa or more but not exceeding 960 MPa and having an impact strength of 27 Joules or more but not exceeding 300 Joules at -20°C or less but not less than -60°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

16.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 160 mm, with a Brinell hardness of 380 HBW or more but not exceeding 460 HBW and having an impact strength of 15 Joules or more but not exceeding 200 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

17.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 160 mm, with a Brinell hardness of 469 HBW or more but not exceeding 540 HBW and having an impact strength of 15 Joules or more but not exceeding 200 Joules at -40°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

18.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 2 mm or more but not exceeding 300 mm, with a yield strength of 200 MPa or more but not exceeding 500 MPa and having an impact strength of 27 Joules or more but not exceeding 350 Joules at -20°C, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.40

19.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness of 10 mm or more but not exceeding 100 mm, with a yield strength of 315 MPa or more but not exceeding 460 MPa and a tensile strength of 490 MPa or more but not exceeding 650 MPa, having an impact strength of 27 Joules or more but not exceeding 40 Joules at +20°C or less but not less than -20°C, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.50

01.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, other, not further worked than cold-rolled (cold reduced), for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty

460.15

7225.99

01.06

Flat-rolled products of other steel, of a width of 600 mm or more, other, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.99

02.06

Other flat-rolled products of other alloy steel, of a width of 600 mm or more, other, with a yield strength of 700 MPa or more but not exceeding 960 MPa, with a tensile strength of 750 MPa or more but not exceeding 1150 MPa and having an impact strength of 30 Joules at -40°C or less, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7225.99

03.06

Flat-rolled products of other alloy steel, of a width of 600 mm or more, other, for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7226.99

01.06

Flat-rolled products of other alloy steel, of a width of less than 600 mm, other, for use in the automotive industry, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the products are not available in the SACU market

Full duty in Schedule No. 1 and Schedule No. 2

460.15

7228.70

01.06

I sections, of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded of a height of 530 mm or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit

Full duty

460.15

7228.70

02.06

H sections, of other alloy steel, not further worked than hot rolled, hot-drawn or extruded of a height and width of 300 mm x 300 mm or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit

Full duty

460.15

73.03

01.04

Tubes and pipes of iron or steel, for use as steam boiler, superheater and economizer tubing, in such quantities and at such times as the International Trade Administration Commission, may allow by specific permit

Full duty

460.15

73.04

01.04

Full duty

460.15

73.05

01.04

Full duty

460.15

73.06

01.04

Full duty

460.15

7306.30

01.06

Tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, after that Commission has been satisfied that the tubes, pipes and hollow profiles will be used in the manufacture of brake line and fuel line assemblies and the National Regulator for Compulsory Specifications has certified that such tubes, pipes and hollow profiles comply with the specifications for brake and fuel lines used in motor vehicles

Full duty

460.15

7312.10

01.06

Stranded wire, ropes and cables of iron or steel, not electrically insulated, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission, may allow by specific permit, provided the products are not available in the SACU market.

Full duty

460.15

7312.90

01.06

Plaited bands, slings and the like, of iron or steel, not electrically insulated, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission, may allow by specific permit, provided the products are not available in the SACU market.

Full duty

460.15

73.18

01.04

Screws, bolts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles of stainless steel, in such quantities, at such times and subject to such conditions as the International trade Administration Commission may allow by specific permit, provided the Commission is satisfied that the subject goods are not available in the SACU region

Full duty

460.15

7604.29.15

01.08

Bars and rods, of aluminium-copper-magnesium-zinc alloys, of a maximum cross-sectional dimension of 25 mm or more but not exceeding 52 mm and of a length not exceeding 3 221 mm, having a copper content of 1,2 per cent or more but not exceeding 2 per cent by mass, a magnesium content of 2,1 per cent or more but not exceeding 2,9 per cent by mass and a zinc content of 5,1 per cent but not exceeding 6,1 per cent by mass, with a yield strength of 460 MPa or more but not exceeding 480 MPa, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the bars and rods are not available in the SACU market

Full duty

460.15

7604.29.65

01.08

Profiles, of aluminium-copper-magnesium-zinc alloys, of a maximum cross-sectional dimension of 60 mm or more but not exceeding 85 mm, having a copper content of 1,2 per cent or more but not exceeding 2 per cent by mass, a magnesium content of 2,1 per cent or more but not exceeding 2,9 per cent by mass and a zinc content of 5,1 per cent but not exceeding 6,1 per cent by mass, with a yield strength of 460 MPa or more but not exceeding 480 MPa, at such times, in such quantities and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the bars and rods are not available in the SACU market

Full duty

460.15

76.06

01.04

Aluminium plates, sheets and strip of a thickness not exceeding 10 mm, coiled, covered on one or both sides with paint or enamel, in such quantities and at such times as the International Trade Administration Commission, may allow by specific permit

Full duty

460.15

9406.90.10

01.08

Greenhouses of iron or non-alloy steel, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the steel and other materials are not available in the SACU market

Full duty

460.16

MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT AND PARTS THEREOF

460.16

8462.10

01.06

Hydraulic presses of a drawing capacity of 18 000 kN or more and of a table size of 4 500 mm or more, in such quantities, at such times and subject to such conditions as the International Trade Administration Commission, may allow by specific permit, provided the International Trade Administration Commission is satisfied that such presses will be used solely or principally in the manufacture of side frame panels for motor vehicles

Full duty

460.16

84.81

01.04

Segmental ball plug valves, positioner and actuator contained in a single housing, for use in the paper and pulp industry

Full duty

460.16

85.00

01.02

Parts, certified by the supplier to have been manufactured for use solely or principally in radiotelephonic transmission and reception apparatus for operation in the frequency ranges 1,6 to 26 megahertz and 118 to 136,975 megahertz

Full duty

460.16

85.00

02.02

Parts for radar apparatus and radio navigational aid apparatus, used for nautical and aeronautical purposes

Full duty

460.16

8523.52.10

01.08

Digital "smart cards" (excluding proximity cards or tags), in such quantities, at such times and subject to such conditions as the International Trade Administration Commission may allow by specific permit, provided the "smart cards" are not available in the SACU area

Full duty

460.16

85.28

01.04

Surveillance systems, incorporating a thermal imaging camera, monitor, power supply unit, control console and telemetry transmitter and receiver

Full duty

460.16

85.36

01.04

Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, for a voltage not exceeding 1 kV, of a flameproof, waterproof or watertight types: Provided that a certificate of the South African Bureau of Standards is presented at the time of entry that the apparatus is flameproof, waterproof or watertight

Full duty less 5%

360.16

8544.70

01.06

Full duty

460.17

VEHICLES, AIRCRAFT, VESSELS AND ASSOCIATED TRANSPORT EQUIPMENT

NOTES:

(a)	For the purposes of this item unless the context indicates otherwise, any expression to which a meaning has been assigned in item 317.03 has the meaning so assigned.

(b)	For the purposes of this rebate item the extent of rebate "not exceeding the duty as calculated in terms of the Notes to this rebate item" means the customs duty payable and must be calculated on a value determined as follows:

(i)

The value for customs duty purposes of specified motor vehicles imported less the value of any excess volume assembly allowances as calculated in the quarterly account of a manufacturer of specified motor vehicles (as defined in rebate item 317.03) and less the value of a production rebate credit certificate.

(ii)

For the purposes of paragraph (i) above the value of the excess volume assembly allowance and the value of a production rebate credit certificate shall be reduced by 20 per cent if the rebate is used to import specified motor vehicles. No adjustment shall, however, be made if the production rebate credit certificate was issued in respect of specified motor vehicles produced fitted with engines and gearboxes.

2.	These Notes are only applicable to the ordinary duty specified in Part 1 of Schedule No. 1.

460.17

00.00

03.02

Automotive components for specified motor vehicles, as defined in rebate item 317.03 or heavy motor vehicles as defined in Note 1 to rebate item 317.07, classifiable in tariff subheadings 4011.10, 4011.20, 4012.11, 4012.12, 4016.99.20, 5911.90.20, 6813.20.10, 6813.81.10, 7007.11, 7007.21, 7009.10, 8302.30, 84.09, 8415.20, 8418.99.40, 8421.23.30, 8421.31.50, 8421.39.20, 8421.99.66, 8483.30.55, 84.84, 8507.10, 85.11, 85.12, 8536.30.20, 8536.61.20, 8536.69.30, 8536.90.20, 8536.10.20, 8539.10, 8539.21.20, 8539.29.45, 8544.30, 8544.4, 87.07, 87.08 and 9401.20

Not exceeding the duty applicable to such goods in Part 1 of Schedule No. 1 calculated on the value reflected on the PRCC

460.17

87.00

03.02

Motor vehicles classifiable under subheadings 8701.20.10, 8702.10.81,8702.10.85, 8702.10.87, 8702.90.81, 8702.90.85, 8702.90.87, 8703.21.90, 8703.22.90, 8703.23.90, 8703.24.90, 8703.31.90, 8703.32.90, 8703.33.90, 8703.90.90, 8704.21.81, 8704.21.83, 8704.31.81, 8704.31.83, 8704.90.81, 8704.90.83, 8706.00.05 and 8706.00.15 entered on or before 31 December 2015 for the purposes of this item, specified by the International Trade Administration Commission, by means of a certificate:

Provided that the application for such certificate shall not be considered by the International Trade Administration Commission,

unless the applicant—

(a)	proves that he or she is a manufacturer of specified motor vehicles registered in terms of Chapter 98 or an automotive component manufacturer which is contracted to supply automotive components to a manufacturer of specified motor vehicles;

(b)

has submitted a business plan on or before 31 December 2009 in respect of a project to invest in productive assets, with a view to producing specified motor vehicles or automotive components of sufficient quality, quantity and at competitive prices to supply to the common customs area and international markets in line with the guidelines issued by the International Trade Administration Commission; and

(c)	has proved to the satisfaction of the International Trade Administration Commission that the project will contribute to the achievement of the overall objectives of the Government's Motor Industry Development Programme.

NOTES:

Productive assets include the following: Buildings erected for the sole purpose of manufacturing specified motor vehicles or automotive components, and new or unused plant, machinery, tooling, jigs, dies and moulds, in-plant logistics, testing, design and production IT equipment and supporting software. The duty which may be rebated is calculated as follows: A total of 20 per cent of the value of the productive assets approved by the International Trade Administration Commission for purposes of this rebate provision, but limited to 4 per cent per annum up to 31 December 2014, thereafter a PAA certificate issued for any remaining amount of Productive Asset Allowance value to be valid to 31 December 2015.

2.	The International Trade Administration Commission may impose further conditions without prior notice, and the certificate or amended certificate shall be forwarded directly to the Commissioner for retention by him or her.

Full duty less the duty in Section B of Part 2 of Schedule No. 1

460.17

87.00

04.02

Motor vehicles principally designed for the transport of physically disabled persons, including station wagons (excluding racing cars), adapted or to be adapted to be used for the transport of physically disabled persons at such times and under such conditions as the International Trade Administration Commission after consultation with the National Council for Persons with Physical Disabilities in South Africa, may allow by specific permit.

Provided that:

(a)	such permit may only be issued to a person or organization who is registered to care for and to transport physically disabled persons; and

(b)

if such a motor vehicle is offered, advertised, lent, hired, leased, pledged, given away, exchanged, sold or otherwise disposed of within a period of 3 years from the date of entry under this rebate item, such foregoing acts shall render such vehicle liable to the payment of duty on a PRO RATA basis.

Full duty

460.17

8701.20

02.06

Road tractors for semi-trailers

Not exceeding the duties calculated in terms of the Notes to this rebate item

460.17

87.02

02.04

Motor vehicles for the transport of ten or more persons

Not exceeding the duties calculated in terms of the Notes to this rebate item

460.17

87.03

02.04

Motor cars and other motor vehicles principally designed for the transport of persons, including station wagons (excluding racing cars), adapted or to be adapted to be driven solely by a physically disabled person, at such times and under such conditions as the International Trade Administration Commission, after consultation with the National Council for Persons with Physical Disabilities in South Africa, may allow by specific permit.

Provided that:

(a)	the adaptation of the motor vehicle is of such a nature that the physically disabled driver of the motor vehicle has easy access to all controls necessary to drive such vehicle;

(b)	such permit may not be issued within a period of 3 years of the issue of the previous permit to such disabled person;

(c)	permits may, however, be issued with a shorter period provided proof is submitted that the motor vehicle previously entered under rebate of duty was stolen or was written off by the licensing authorities; and

(d)	if such vehicle is offered, advertised, lent, hired, leased, pledged, given away, exchanged, sold or otherwise disposed of within a period of 3 years from the date of entry in terms of this item, such foregoing acts shall render such vehicle liable to the payment of duty on a PRO RATA basis.

Full duty

460.17

87.03

03.04

Motor cars (including station wagons) of heading 87.03

Not exceeding the duties calculated in terms of the Notes to this rebate item

460.17

87.03

04.04

Motor cars and other motor vehicles principally designed for the transport of persons (excluding commercial vehicles or buses) including station wagons and racing cars, classifiable in tariff subheading 87.03, which were manufactured 40 years or more prior to the date of importation and/or such motor cars of any age which are determined to be international collectors' vehicles by the International Trade Administration Commission (ITAC) and subject to the issuing of an ITAC import permit (subject to import control conditions) authorising the importation of the particular vehicle, under such conditions as ITAC may allow by specific rebate permit

Full duty in Part 1 of Schedule No. 1

460.17

87.04

02.04

Motor vehicles for the transport of goods of heading 87.04 (excluding motor vehicles of subheading 8704.10)

Not exceeding the duties calculated in terms of the Notes to this rebate item

460.17

87.06

02.04

Chassis fitted with engines of heading 87.06 (excluding those for motor vehicles of subheading 8704.10)

Not exceeding the duties calculated in terms of the Notes to this rebate item

460.18

OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; CLOCKS AND WATCHES; MUSICAL INSTRUMENTS; PARTS AND ACCESSORIES THEREOF

460.18

9001.10

01.06

Full duty

460.18

9018.31

01.06

Disposable hypodermic syringes of plastics, fitted with needles that, after use, are permanently retracted into the barrel of the syringe, at such times, in such quantities and under such conditions as the International Trade Administration Commission may allow by specific permit: Provided that it was proven to the Commission that there are no manufacturers of such or similar safety syringes in the SACU area.

Full duty

460.23

GOODS IMPORTED OR CLEARED FROM A CUSTOMS AND EXCISE WAREHOUSE FOR THE EXPLORATION FOR PETROLEUM OR PRODUCTION OF PETROLEUM AS CERTIFIED BY THE DIRECTOR-GENERAL: MINERAL RESOURCES

Goods imported or cleared from a customs and excise warehouse by a person who—

(i)	is certified by the Director-General: Mineral Resources or the Chief Executive Officer of the agency designated in terms of section 70 of the Mineral and Petroleum Resources Development Act, 2002 (Act No. 28 of 2002), to be a person who, in the Republic—

(1)	explores for petroleum in terms of an exploration right issued in terms of section 80 of the Mineral and Petroleum Resources Development Act, 2002 (Act No. 28 of 2002);

(2)	produces petroleum in terms of a production right issued in terms of section 84 of the Mineral and Petroleum Resources Development Act, 2002 (Act No. 28 of 2002); or

(3)	is a contractor of any person referred to in paragraph (1) or (2); or

(ii)

subject to the approval of the Director-General:Mineral Resources or the Chief Executive Officer of the agency designated in terms of section 70 of the Mineral and Petroleum Resources Development Act, 2002 (Act No. 28 of 2002), is a person (including, if a company, any subsidiary of such company) referred to in paragraph (1) or (3) who supplies such goods directly to any person or to any contractor of any person referred to in paragraph (2), for use in the manufacture of any equipment, installation or device, for use solely in operations in connection with the exploration for, or production of petroleum, and except for the purposes of item 460.23/00.00/02.00, in such quantities and at such times as the International Trade Administration Commission, may allow by specific permit, excluding—

(a)	distillate fuels, residual fuel oil and biodiesel;

(b)	goods for the personal use of any person; or

(c)	goods for use in the exploration or processing of any product other than petroleum as defined in the Mineral and Petroleum Resources Development Act, 2002 (Act No. 28 of 2002).

NOTES:

1.	For the purposes of paragraph (ii), the person entering such goods under rebate of duty shall be liable for the duty rebated unless—

(a)	he or she proves that such goods have been so supplied or used in the manufacture of the equipment, installation or device which has been delivered to the person referred to in paragraph (2); or

(b)	on request by the person who entered the goods under rebate of duty, and subject to the permission of the Commissioner the goods have been—

(i)	entered for home consumption and any duty and value-added tax payable in terms of the Value-Added Tax Act, 1991 (Act No. 89 of 1991) have been paid;

(ii)	destroyed or abandoned in terms of item 412.07; or

(iii)

exported.

2.	Notwithstanding the Notes to Schedules Nos. 3 and 4, "Full duty" where it appears in the "Extent of Rebate" column opposite rebate item 460.23/00.00/01.00 means goods free of duty as contemplated in section 75A.

460.23

00.00

01.00

Goods (excluding goods free of duty as contemplated in section 75A) imported or cleared from a customs and excise warehouse for the exploration for or production of petroleum as contemplated in the notes to this item

Full duty less the duty in Section B of Part 2 of Schedule No. 1

460.23

00.00

02.00

Goods free of duty, imported or cleared from a customs and excise warehouse for the exploration for or production of petroleum as contemplated in the notes to this item

Full duty

460.24

REBATE OF SPECIFIC CUSTOMS DUTIES ON EXCISABLE GOODS ENTERED INTO THE REPUBLIC

460.24

00.00

01.00

Goods specified in Part 2A of Schedule No. 1, imported into the Republic for further processing, blending or mixing or entered for use in the manufacture of excisable goods of another or the same class or kind (excluding ethyl alcohol for industrial use or for use in the manufacture of other non-liquor products and specified aliphatic hydrocarbon solvents, as defined in Additional Note 1(ij) to Chapter 27)—

Provided that:

(a)	the provisions of Rule 19A.09(c) are complied with;

(b)	all other provisions of the Customs and Excise Act pertaining to locally manufactured excisable goods are complied with;

(c)	the goods are imported by a licensed manufacturer, into a storage (OS) or manufacturing warehouse; and

(d)	the goods are removed by such licensed manufacturer or a licensed remover as contemplated in Rule 64D.

The duty in Part 2A of Schedule No. 1

460.24

22.00

01.02

Undenatured or partially denatured ethyl alcohol of headings 22.07 and 22.08 imported into the Republic, for industrial use or for use in the manufacture of other non-liquor products - Provided that:

(a)	the provisions of Rule 19A.09(c) are complied with;

(b)	all other provisions of the Customs and Excise Act pertaining to locally manufactured excisable goods are complied with;

(c)	the goods are imported by a licensed manufacturer or licensed supplier (SOS warehouse licensed for denaturing of spirits) into a storage (OS), manufacturing or special storage (SOS) warehouse; and

(d)	the goods are removed by such licensee or a licensed remover as contemplated in Rule 64D.

The duty in Part 2A of Schedule No. 1

460.24

22.00

02.02

Undenatured or partially denatured ethyl alcohol of headings 22.07 and 22.08 imported into the Republic, for industrial use or for use in the manufacture of other non-liquor products—

Provided that:

(a)	the provisions of Rule 19A.09(c) are complied with;

(b)	all other provisions of the Customs and Excise Act pertaining to locally manufactured excisable goods are complied with;

(c)	the goods are imported by a licensed manufacturer or licensed supplier (SOS warehouse licensed for denaturing of spirits) into a storage (OS), manufacturing or special storage (SOS) warehouse; and

(d)	the goods are removed by such licensee or a licensed remover as contemplated in Rule 64D.

The duty in Part 2A of Schedule No. 1

460.24

22.07

01.04

Fully denatured ethyl alcohol as provided for in Note 4(c) to Section D of Part 1 of Schedule No. 6 of the Act, imported into the Republic for industrial use or for use in the manufacture of other non-liquor products

The duty in Part 2A of Schedule No. 1

460.24

2710.12

01.06

Specified aliphatic hydrocarbon solvents, as defined in Additional Note 1(ij) to Chapter 27, entered for the purpose of this rebate item in such quantities, for such purposes and under such conditions as the Commissioner may allow by specific permit

The duty in Part 2A of Schedule No. 1

460.25

GOODS, IN SUCH QUANTITIES AT SUCH TIMES AND UNDER THE CONDITIONS SPECIFIED IN GOVERNMENT GAZETTE NO. 16886 OF 18 DECEMBER 1995, AS THE DIRECTOR-GENERAL: DEPARTMENT OF AGRICULTURE, LAND REFORM AND RURAL DEVELOPMENT MAY ALLOW BY SPECIFIC PERMIT

460.25

0201.10

01.06

Carcasses and half carcasses of bovine animals, fresh or chilled

Full duty less 13,8%

460.25

0201.20

01.06

Cuts with bone in (excluding carcasses and half carcasses) of bovine animals, fresh or chilled

Full duty less 13,8%

460.25

0201.30

01.06

Boneless meat of bovine animals, fresh or chilled

Full duty less 32%

460.25

0202.10

01.06

Carcasses and half carcasses of bovine animals, frozen

Full duty less 13,8%

460.25

0202.20

01.06

Cuts with bone in (excluding carcasses and half carcasses), of bovine animals, frozen

Full duty less 13,8%

460.25

0202.30

01.06

Boneless meat of bovine animals, frozen

Full duty less 32%

460.25

0204.10

01.06

Carcasses and half carcasses of lamb, fresh or chilled

Full duty less 19%

460.25

0204.21

01.06

Carcasses and half carcasses of sheep, fresh or chilled

Full duty less 19%

460.25

0204.22

01.06

Cuts with bone in (excluding carcasses and half carcasses), of sheep, fresh or chilled

Full duty less 13,3%

460.25

0204.23

01.06

Boneless meat of sheep, fresh or chilled

Full duty less 13,2%

460.25

0204.30

01.06

Carcasses and half carcasses of lamb, frozen

Full duty less 19%

460.25

0204.41

01.06

Carcasses and half carcasses of sheep, frozen

Full duty less 19%

460.25

0204.42

01.06

Cuts with bone in (excluding carcasses and half carcasses), of sheep, frozen

Full duty less 13,2%

460.25

0204.43

01.06

Boneless cuts of meat of sheep, frozen

Full duty less 13,2%

460.25

0204.50

01.06

Meat of goats, fresh, chilled or frozen

Full duty less 16,4%

460.25

04.01

01.04

Milk and cream, not concentrated nor containing any added sugar or other sweetening matter, fresh

Full duty less 19,2%

460.25

04.02

01.04

Milk and cream, concentrated or containing added sugar or other sweetening matter, in powder

Full duty less 19,2%

460.25

04.03

01.04

Buttermilk, curdled milk and cream, yoghurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa

Full duty less 19,2%

460.25

04.04

01.04

Whey, whether or not concentrated or containing added sugar or other sweetening matter; products consisting of natural milk constituents, whether or not containing added sugar or other sweetening matter, not elsewhere specified or included

Full duty less 19,2%

460.25

04.05

01.04

Butter and other fats and oils derived from milk

Full duty less 15,8%

460.25

04.06

01.04

Cheese (excluding cheddar and sweetmilk cheese)

Full duty less 19%

460.25

04.08

01.04

Birds' eggs, not in shell, and egg yolks, dried, cooked by steaming or by boiling in water, moulded, frozen or otherwise preserved, whether or not containing added sugar or other sweetening matter

Full duty less 3,8%

460.25

0708.10

01.06

Peas (PISUM SATIVUM), shelled or unshelled, fresh or chilled

Full duty less 6,6%

460.25

07.10

01.04

Vegetables (excluding potatoes and leguminous vegetables) (uncooked or cooked by steaming or boiling in water), frozen

Full duty less 7,4%

460.25

0710.10

01.06

Potatoes (uncooked or cooked by steaming or boiling in water), frozen

Full duty less 9,8%

460.25

0710.2

01.05

Leguminous vegetables (excluding peas (PISUM SATIVUM) (uncooked or cooked by steaming or boiling in water), shelled or

unshelled, frozen

Full duty less 4,8%

460.25

0710.21

01.06

Peas (PISUM SATIVUM) (uncooked or cooked by steaming or boiling in water), shelled or unshelled, frozen

Full duty less 6,6%

460.25

07.12

01.04

Dried vegetables (excluding potatoes), whole, cut, sliced, broken or in powder, but not further prepared

Full duty less 7,4%

460.25

0712.90

01.06

Dried potatoes, whether or not cut or sliced, but not further prepared

Full duty less 9,8%

460.25

0713.20

01.06

Dried chickpeas (garbanzos), shelled, whether or not skinned or split

Full duty less 6,6%

460.25

0713.3

01.05

Dried beans (VIGNA SPP., PHASEOLUS SPP.), shelled, whether or not skinned or split

Full duty less 4,8%

460.25

0713.60

01.06

Pigeon peas, shelled, whether or not skinned or split

Full duty less 4,8%

460.25

0713.90

01.06

Other dried leguminous vegetables, shelled, whether or not skinned or split

Full duty less 4,8%

460.25

0806.20

01.06

Grapes, dried

Full duty less 4,6%

460.25

0813.20

01.06

Prunes, dried

Full duty less 6,6%

460.25

0813.30

01.06

Apples

Full duty less 6%

460.25

0813.50

01.06

Mixtures of nuts or dried fruit of Chapter 8

Full duty less 8,8%

460.25

10.01

01.04

Wheat

Full duty less 14,4%

460.25

10.05

01.04

Maize (corn)

Full duty less 10%

460.25

10.08

01.04

Buckwheat, millet and canary seed; other cereals

Full duty less 8,6%

460.25

12.01

01.04

Soya beans, whether or not broken

Full duty less 8%

460.25

19.01

01.04

Malt extract; food preparations of flour, groats, meal, starch or malt containing cocoa or containing less than 40 per cent by mass of cocoa calculated on a totally defatted basis not else where specified or included (excluding preparations for infant use, put up for retail sale, gluten-free bread and cake mixtures, cornflour and pudding mixtures); food preparations of goods of headings 04.01 to 04.04, not containing cocoa or containing less than 5 per cent by mass of cocoa calculated on a totally defatted basis, not elsewhere specified or included (excluding preparations for infant use, put up for retail sale, and pudding powders)

Full duty less 19,8%

460.25

1901.10

01.06

Preparations for infant use, put up for retail sale

Full duty less 19,2%

460.25

19.02

01.04

Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni, couscous, whether or not prepared

Full duty less 10,8%

460.25

21.06

01.04

Food preparations not elsewhere specified or included (excluding pudding mixtures and ice cream mixtures)

Full duty less 7,4%

460.25

2106.90

01.06

Pudding mixtures

Full duty less 19,8%

460.25

2106.90

01.06

Ice cream mixtures

Full duty less 19,2%

460.25

2204.10

01.06

Sparkling wine, in containers holding 2 li or less

The duty in Part 1 of Schedule No. 1 less 14,6%

460.25

2204.10

02.06

Sparkling wine, in containers holding more than 2 li

The duty in Part 1 of Schedule No. 1 less 19,6%

460.25

2204.21

01.06

Wine (excluding sparkling wine) and grape must with fermentation prevented or arrested by the addition of alcohol, in containers holding 2 li or less

The duty in Part 1 of Schedule No. 1 less 14,6%

460.25

2204.29

01.06

Wine (excluding sparkling wine) and grape must with the fermentation prevented or arrested by the addition of alcohol, in containers holding more than 2 li

The duty in Part 1 of Schedule No. 1 less 19,6%

460.25

2204.30

01.06

Grape must (excluding grape must with fermentation prevented or arrested by the addition of alcohol)

The duty in Part 1 of Schedule No. 1 less 19,6%

460.25

2205.10

01.06

Vermouth and other wine of fresh grapes flavoured with plants or aromatic substances, in containers holding 2 li or less

The duty in Part 1 of Schedule No. 1 less 14,6%

460.25

2205.90

01.06

Vermouth and other wine of fresh grapes flavoured with plants or aromatic substances, in containers holding more than 2 li

The duty in Part 1 of Schedule No. 1 less 19,6%

460.25

22.06

01.04

Other fermented beverages (for example, cider, perry, mead); mixtures of fermented beverages and mixtures of fermented beverages and non-alcoholic beverages not elsewhere specified or included

The duty in Part 1 of Schedule No. 1 less 14,6%

460.25

22.07

01.04

Undenatured ethyl alcohol of an alcoholic strength by volume of 80 per cent vol. or higher, ethyl alcohol and other spirits, denatured, of any strength

The duty in Part 1 of Schedule No. 1 less 119.4%

460.25

2208.20

01.06

Spirits obtained by distilling grape wine or grape marc, in containers holding 2 li or less

The duty in Part 1 of Schedule No. 1 less 13,4%

460.25

2208.20

02.06

Spirits obtained by distilling grape wine or grape marc, in containers holding more than 2 li

The duty in Part 1 of Schedule No. 1 less 24,2%

460.25

2208.30

01.06

Whiskies, in containers holding 2 li or less

The duty in Part 1 of Schedule No. 1 less 13,4%

460.25

2208.30

02.06

Whiskies, in containers holding more than 2 li

The duty in Part 1 of Schedule No. 1 less 24,2%

460.25

2208.40

01.06

Rum and tafia, in containers holding less than 2 li

The duty in Part 1 of Schedule No. 1 less 13,4%

460.25

2208.40

02.06

Rum and tafia, in containers holding more than 2 li

The duty in Part 1 of Schedule No. 1 less 24,2%

460.25

2208.40

03.06

Other spirits obtained by distilling fermented sugarcane products

The duty in Part 1 of Schedule No. 1 less 119,4%

460.25

2208.50

01.06

Gin and Geneva, in containers holding 2 li or less

The duty in Part 1 of Schedule No. 1 less 13,4%

460.25

2208.50

02.06

Gin and Gineva, in containers holding more than 2 li

The duty in Part 1 of Schedule No. 1 less 24,2%

460.25

2208.60

01.06

Vodka

The duty in Part 1 of Schedule No. 1 less 119,4%

460.25

2208.70

01.06

Liqueurs and cordials

The duty in Part 1 of Schedule No. 1 less 119,4%

460.25

2208.90

01.06

Other

The duty in Part 1 of Schedule No. 1 less 119,4%

460.25

24.01

01.04

Unmanufactured tobacco; tobacco refuse

Full duty less 8,8%

460.25

52.01

01.04

Cotton, not carded or combed

Full duty less 12%

460.26

GAUTRAIN RAPID RAIL LINK PROJECT

460.26

00.00

01.00

Goods of any description, for use in the construction of the infrastructure known as the "Gautrain Rapid Rail Link", at such times and in such quantities as the International Trade Administration Commission of South Africa, may allow by specific permit

Full duty